詳細說明

不銹鋼工業化工罐體/ Stainless steel industrial logistics tank

不銹鋼工業化工罐體是優質灌裝工業氣體的鋼瓶的統稱，屬于壓力容器（一般在灌滿氣體的鋼瓶內壓在shu150個大氣壓以下），因涉及到生產安全，所以國家每隔一定時間要做強制檢查。灌裝的工業氣體品種有氧氣、氮?dú)狻錃?、氬氣、二氧化碳、二氧化硫、氟化氫、液氨、液氯、乙炔等，并且瓶身上用不同顏色和?biāo)識加以區分。瓶就是存放工業氣體的鋼瓶的總稱。鋼瓶(gāng píng) 貯存高壓氧氣、煤氣、石油液化氣等的鋼制瓶。鋼瓶的安全儲存和運輸 氣體鋼瓶一般盛裝永久氣體、液化氣體或混合氣體。氣體鋼瓶瓶充裝單位、氣體鋼瓶檢驗單位、氣體鋼瓶使用單 (包括工廠、實驗室、醫院、學校、疾控中心、電子室、潔凈室、工業機構等)、瓶裝氣體和 氣體鋼瓶經銷單位的氣瓶管理急需提高，應加強對運輸、儲存氣體鋼瓶瓶的安全管理。

Chemical industry logistics bottle is the general name of the steel cylinder filled with industrial gas, which belongs to the pressure vessel (generally, the pressure in the steel cylinder filled with gas is below 150 atmospheres). Due to the production safety, the state has to do compulsory inspection every certain time. The types of industrial gases are oxygen, nitrogen, hydrogen, argon, carbon dioxide, sulfur dioxide, hydrogen fluoride, liquid ammonia, liquid chlorine, acetylene, etc., and the bottles are distinguished by different colors and marks. Cylinder is the general name of the steel cylinder for storing industrial gas. Steel cylinder (g ā ng P í ng) is a steel cylinder used to store high pressure oxygen, gas, liquefied petroleum gas, etc. The safe storage and transportation of gas cylinders generally contain permanent gas, liquefied gas or mixed gas. The management of gas cylinder filling units, gas cylinder inspection units, gas cylinder usage list (including factories, laboratories, hospitals, schools, centers for Disease Control and prevention, electronic rooms, clean rooms, industrial institutions, etc.), gas cylinders and gas cylinder distribution units need to be improved. The safety management of gas cylinders for transportation and storage should be strengthened.

工業用標準氣瓶容量一般為40L ，額定工作壓力為15MPa 。瓶體漆成天藍色，并漆有“X氣”黑色字樣。 2、氣瓶及其附件的構造 ·氣瓶本體 系管狀無縫結構，上端瓶口處的縮頸部分為瓶頸，瓶頸與瓶體的過渡部分叫瓶肩，瓶頸外側固定連接有頸圈。下端一般為凹形底。瓶體由優質錳鋼、鉻鉬鋼或其他合金鋼制成。最常用的是中容積瓶，外徑219mm，容積40L，高度約1.5mm，公稱工作壓力15Mpa，許用壓力18Mpa。 ·主要附件 a、瓶閥 一般由銅材制成，抗燃，且不起靜電及機械火花。其密封材料應有好的阻燃及密封性能。 b、瓶帽 保護瓶閥免受磕碰，通過螺紋與頸圈連接。瓶帽上一般有排氣孔或側孔，以防瓶閥漏氣使瓶帽承壓。 c、防震圈 套于瓶體上的兩個彈性橡膠圈，起減震和保護瓶體的作用。

The capacity of industrial standard gas cylinder is generally 40L, and the rated working pressure is 15MPa. The bottle is painted sky blue with the words "x gas" in black. 2. The necking part at the top of the bottle mouth is the bottle neck, the transition part between the bottle neck and the bottle body is called the bottle shoulder, and the outside of the bottle neck is fixedly connected with a collar. The lower end is generally concave. The bottle body is made of high quality manganese steel, chromium molybdenum steel or other alloy steel. The most commonly used is the medium volume bottle, with an outer diameter of 219mm, a volume of 40L, a height of about 1.5mm, a nominal working pressure of 15MPa and an allowable pressure of 18Mpa. ·The main accessories A and bottle valve are generally made of copper, which are flame-resistant and free from static electricity and mechanical sparks. The sealing material should have good flame retardant and sealing performance. b. The bottle cap protects the bottle valve from collision and is connected with the collar through the thread. Generally, there are vent holes or side holes on the bottle cap to prevent the bottle valve from leaking and making the bottle cap bear pressure. c. Two elastic rubber rings on the bottle body are used for shock absorption and protection.

SUS?不銹鋼工業化工罐體是指用金屬薄板制造的薄壁包裝器。它廣泛應用于食品包裝、醫藥品包裝、日用品包裝、儀器儀表包裝，工業品包裝、軍火包裝等方面;包括工廠、實驗室、醫院、學校、疾控中心、電子室、潔凈室、工業機構等。

Sus Chemical industry logistics bottle body is a thin-walled packer made of sheet metal. It is widely used in food packaging, pharmaceutical packaging, daily necessities packaging, instrument packaging, industrial packaging, arms packaging, etc.; including factories, laboratories, hospitals, schools, centers for disease control, electronic rooms, clean rooms, industrial institutions, etc.